Binatone Icarus 2020 handleiding

Binatone Icarus 2020

Bekijk hier de Binatone Icarus 2020 handleiding. Het bekijken en downloaden van deze Dect/voip-telefoon handleiding is geheel gratis.

Merk
Binatone
Model
Icarus 2020
Product
Dect/voip-telefoon
EAN
5012786433250, 5012786486270, 5012786486287
Taal
Engels
Bestandstype
PDF
THIS EQUIPMENT IS NOT DESIGNED FOR MAKING
EMERGENCY TELEPHONE CALLS WHEN THE POWER
FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE
MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.
Before operating this set,
please read these instructions carefully.
USER GUIDE
Digital Cordless Telephone
CLEANING AND CARE
Do not clean any part of your Icarus 2020 system with benzene, thinner or
other solvent chemicals this
may cause permanent damage which is not
covered by the Guarantee.
When necessary, clean it with a damp cloth.
Keep your hot, humid conditions
or strong
sunlight,and don't let it get wet.
Every effort has been made to ensure high standards of reliability for your
However, if something
does go wrong, please
try to repair it yourself
consult your supplier or the Helpline.
do not
Icarus 2020 system away from
Icarus 2020 system
GUARANTEE AND SERVICE
The
purchase shown on your sales receipt. This guarantee
does not cover any
faults or defects caused by accidents,misuse, fair wear and tear, neglect,
faults on the telephone line, lightning, tampering with the equipment, or any
attempt at adjustment or repair other than through approved agents.
Please keep your sales (till) receipt this is your guarantee.
You should also keep the original packaging material.
In the unlikely event that you need to return your
Repair Centre while it is under guarantee, there will be a 5 handling charge.
£
While the unit is under Guarantee
1. Disconnect the base unit from the telephone line and the mains electricity
supply.
2. Pack up all parts of your
3. Return the unit to the shop where you bought it, making sure you take your
sales receipt.
After the Guarantee has expired
Remember to include the mains adapter.
3. Call Helpline on 0845 345 9677 (for UK only) and ask for a quotation of the
repair charge and details of where to send your I rus 2020 system for repair.
4. Make sure you include with your
5 Return your
If the unit is no longer under Guarantee, first follow steps 1 and 2 as for repair
under Guarantee. Then...
¾ Your name and address
¾ A cheque or postal order for the value of the repair
* This does not affect your statutory rights.
Department.
Icarus 2020 system is guaranteed for 12 months from the date of
Icarus 2020 system to our
Icarus 2020 system.
Icarus 2020 system to the address given by the Service
Icarus 2020 system , using the original packaging.
TABLE OF CONTENTS
1
IMPORTANT SAFETY INSTRUCTIONS
........................................................... 4
2
INSTALLING YOUR PHONE
............................................................................ 5
2.1 CONNECTING THE BASE STATION .......................................................................... 5
2.2 INSTALLING AND CHARGING THE BATTERIES...................................................... 5
3
GETTING TO KNOW YOUR PHONE
................................................................ 6
3.1 HANDSET OVERVIEW ................................................................................................ 6
3.2 BASE STATION ...
3. DISPLAY ICONS AND SYMBOLS............................................................................... 8
3. M
ENU STRUCTURE ....................................................................................................
3. T
EXT AND DIGIT ENTRY TABLE................................................................................ 9
3.5.1
HARACTER SET ......................................................................................... 10
4
USING YOUR PHONE
......................................................................................1
4.1 MAKE A CALL ............................................................................................................. 1
4.1.1 PREPARATORY DIALING .........................................................................................1
4.1.2 DIRECT DIALING ....................................................................................................... 1
4.1.3 CALL FROM THE PHONEBOOK ............................................................................... 1 1
4.1.4 CALL FROM THE CALL LIST..................................................................................... 1
4.1.5 CALL FROM THE REDIAL LIST(ONLY AVAILABLE WITH CALLER DISPLAY) ...... 1
4.1.6
CALL TIMER .............................................................................................................. 1
4.2
ANSWER A CALL ....................................................................................................... 1
4.3
END A CALL ................................................................................................................ 1
4.4
ADJUST EARPIECE VOLUME .................................................................................... 1
4.5 MUTE A CALL .............................................................................................................1
4.6 SET THE SILENT MODE .............................................................................................1
4.7 TURN ON THE KEYPAD LOCK...................................................................................1
4.8
REDIAL THE LAST NUMBER .....................................................................................1
4.8.1 REDIAL A NUMBER FROM THE REDIAL LIST.........................................................1
4.8.2 STORE A REDIAL NUMBER INTO THE PHONEBOOK............................................1
4.8.3
DELETE A REDIAL NUMBER ....................................................................................1
4.8.4 DELETE THE ENTIRE REDIAL LIST .........................................................................1
4.9
HANDSET................................................................................................... 1
4.10 MAKE AN INTERNAL CALL (FOR MULTI-HANDSET VERSIONS ONLY ) ................ . 1
4.10.1
INTERCOM ANOTHER HANDSET ..........................................................................1
4.10.2
CALL ALL HANDSETS ............................................................................................. 1
4.10.3
TRANSFER AN EXTERNAL CALL TO ANOTHER HANDSET ................................1
4.10.4 MAKE A 3-WAY CONFERENCE CALL ....................................................................1
5
PRIVATE PHONEBOOK..................................................................................1
5.3 VIEW A PHONEBOOK ENTRY ..................................................................................17
5.4 EDIT A PHONEBOOK ENTRY ................................................................................... 17
5.5
DELETE A PHONEBOOK ENTRY ............................................................................. 17
5.6 DELETE THE ENTIRE PRIVATE PHONEBOOK ....................................................... 17
5.7
CHECK THE PHONEBOOK USAGE .........................................................................17
6
CALLER DISPLAY (NETWORK DEPENDENT)
..............................................1
6.1 VIEW THE CALL LIST ................................................................................................ 18
6.2
STORE A CALL LIST NUMBER INTO THE PHONEBOOK....................................... 18
6.3
DELETE AN ENTRY IN THE CALL LIST ................................................................... 19
6.4 DELETE THE ENTIRE LIST OF THE CALL LIST ...................................................... 19
6.5
VIEW THE DETAILS OF THE CALL LIST ENTRY ....................................................19
7
PHONE SETTINGS
..........................................................................................19
7.1
DATE AND TIME SETTINGS ..................................................................................... 19
7.1.1
CHANGE THE DATE FORMAT ................................................................................19
7.1.2 CHANGE THE TIME FORMAT ................................................................................. 19
7.1.3
SET THE TIME.......................................................................................................... 19
7.1.4
SET THE DATE ......................................................................................................... 20
7.2
ALARM SETTINGS.....................................................................................................
7.2.1
TURN ON/OFF THE ALARM .................................................................................... 20
7.2.2 SET THE ALARM TIME ............................................................................................ 21
7.3
HANDSET SETTINGS ................................................................................................
7.3.1
SET THE RINGER RINGTONE FOR INTERNAL CALLS ........................................
7.3.2 SET THE RINGER MELODY FOR EXTERNAL CALLS ...........................................
7.3.3 SET THE RINGER VOLUME ....................................................................................
7.3.4 SET ALERT TONES..................................................................................................
7.3.5 SET THE HANDSET LANGUAGE ............................................................................
7.3.6 RENAME THE HANDSET .........................................................................................
7.3.7 CHOOSE THE INFORMATION TO BE DISPLAYED IN IDLE ..................................
7.3.8 SET THE AUTO ANSWER .......................................................................................
7.4 BASE SETTINGS ....................................................................................................... 22
5.1 ADD A NEW PHONEBOOK ENTRY .......................................................................... 15
5.2 SEARCH A PHONEBOOK ENTRY............................................................................. 15
8
ANSWERING MACHINE
................................................................................ 25
7
21
22
22
3
4
5
1
8.1 TURN ON/OFF THE ANSWERING MACHINE .......................................................... 25
8.2 LISTEN TO THE MESSAGES IN THE ANSWERING MACHINE ............................. 26
8.3
DELETE ALL MESSAGES IN THE ANSWERING MACHINE ...................................27
8.4
RECORD MEMO ........................................................................................................ 27
8.5
ANSWERING MACHINE SETTINGS ......................................................................... 2
8.5.1
SET THE ANSWER MODE ...................................................................................... 28
8.5.2
SET THE OUTGOING MESSAGE (OGM) LANGUAGE (COUNTRY DEPENDENT)
................................................................................................................................. 28
8.5.3
RECORD YOUR OWN OUTGOING MESSAGE (OGM) ......................................... 28
8.5.4
PLAYBACK AND DELETE THE OUTGOING MESSAGE (OGM) ........................... 30
8.5.5
SET THE ANSWER DELAY ..................................................................................... 30
8.5.6 SET THE RECORDING TIME OF INCOMING MESSAGE ......................................
8.5.7
..................................................................................................
8.5.8 CHANGE THE COMPRESSION RATE .................................................................... 31
8.5.9 ACTIVATE REMOTE ACCESS ................................................................................ 31
TROUBLESHOOTING
..................................................................................3
DECLARATION OF CONFORMITY
. ............................................................ 3
CALL SCREENING
9
3.5.
3.5.
2 PHLISH CHARACTER SET......................................................................................
3
10
NORWEGIAN CHARACTER SET............................................................................ 10
3.5. 11 4 GREEK CHARACTER SET .....................................................................................
1
1
1
1
2
2
2
2
3
3
3
4
4
4
5
20
21
2
21
21
22
22
31
LATIN C
7.4. D
E-REGISTER A HANDSET .................................................................................... 23
7.4. C
HANGE THE DIAL MODE ......................................................................................
7.4. C
HANGE THE FLASH (RECALL)TIME ....................................................................
7.4. CHANGE THE SYSTEM PIN CODE ........................................................................ 24
7.5
REGISTRATION ......................................................................................................... 24
7.6
RESET YOUR PHONE ............................................................................................... 25
23
23
10
FIND THE
1 IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions should always
be followed to reduce the risk of fire, electric shock and injury, including the
1) Read and understand all the instructions.
2) Follow all warnings and instructions marked on the product.
3) Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4) Do not use this product near water (for example, near a bath tub, kitchen
sink, swimming pool).
5) Do not overload wall outlets and extension cords as this can result in the risk
of fire or electric shock.
6) Unplug this product from the wall outlet and refer servicing to our Repair
When the power supply cord or plug is damaged or frayed.
If the product does not operate normally by following the operating instructions.
If the product has been dropped and the cabinet has been damaged.
If the product exhibits a distinct change in performance.
7) Unless it is an emergency, avoid using the telephone during an electrical
storm.There may be a remote risk of electric shock from lightning.
8) Do not use the telephone to report a gas leak in the vicinity of the leak.
9) Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation
periods for the handsets are only applicable with the default battery capacities
10) The use of other battery types or non-rechargeable batteries/primary cells
can be dangerous. These may cause interference and/or damage to the unit
or surroundings. The manufacturer will not be held liable for damage arising
from such non-compliance.
11) Do not use third party charging bays. Damage may be caused to the batteries.
12) Please ensure the batteries are inserted in the correct polarity.
13) Dispose of batteries safely. Do not immerse them in water, burn them, or put
Package contents
The package contains the following items:
Single
• 1 Handset
• 1 Base station
• 1 Mains power adapter
• 1 Telephone line cord
• 2 rechargeable batteries
• 1 User manual
Twin
• 2 Handsets
• 1 Base station
• 1 Mains power adapter
• 1 Telephone line cord
• 4 rechargeable batteries
• 1 User manual
• 1 Charger pod with a connected
mains power adapter
them
where they could get
punctured.
Centre under the
following conditions:
following:
3.2 Base Station with Telephone Answering Machine (TAM) Control
1. PAGE
Press the Page on the base station to page your
2. CHARGING
CRADLE
3. CHARGING LED
Steadily on while the handset is charging.
4. TAM ON/OFF
Press to turn on the answering machine.
Press again to turn off the answering machine.
5. PLAY/STOP
Press to play the message
Press to stop the message playback
SKIP BACKWARD
Press to repeat playing the current message from the beginning.
Press twice to skip
SKIP FORWARD
Press to skip the current message and play the next message
VOLUME UP (+)
Increase (+) speaker volume during message playback
VOLUME DOWN (-)
Decrease (-) speaker volume during message playback
10. DELETE
Press once to delete the message during playback
Press and hold to delete all the messages
Note: New voice messages will not be deleted.
handset. It will ring for approximately
60
11.
7-SEG LED DISPLAY
- - When answering machine is OFF
00 Steadily ON: No voice messages in TAM
XX Flash: There are XX new voice messages received where XX is
from 01 to 59
Steadily ON: Playing the current XX incoming message
XX/FF Flashing XX alternatively with FF: There are XX new voice
messages received where XX is from 01 to 59 and the TAM
memory is full
Flashing FF only: TAM is full and only old voice messages are kept
in
the TAM memory
- - /XX Flashing XX alternatively with - -: Time is not set and there are XX
new voice messages received where XX is from 01 to 59
Flashing – only: Time is not set and there are only old voice
messages in the TAM memory.
YY Steadily ON: There are YY old voice messages (no new voice
messages).
A1/A2 Steadily ON: Playing the current outgoing message (OGM) where
A1,A2 are the OGM of Answer & Record and Answer Only mode
respectively.
XX/An Flashing XX alternatively with An: XX incoming message is now
recording.
LA Flashing: Remote access is in progress
LX Steadily ON: Indicate the current volume level where X is from 1 to 8
3.3 Display Icons and Symbols
The LCD display gives you information on the current status of the telephone.
Scroll up / down the menu items / Phonebook list / Redial list / Call List
Steady when the handset is in range of the base. Flashes when out of
Steady when an intercom call is in progress.
Flashes when there is an incoming internal call.
Indicates a call is in progress on that handset.
Indicates when the telephone answering machine (TAM ) is turned on.
Flashes when new TAM messages are received or the TAM messages
Indicates that the ringer is switched off.
Steady when an alarm is set. Flashes when the alarm is sounding.
Indicates that the keypad is locked.
Indicates when you have a new Voice Mail message.
(This is a Caller Display service and is not usually available from
range of the base or not registered to the base.
UK network providers.)
are full.
Indicates when the battery is fully charged.
Whole icon flashes when the battery performs charging.
Internal block icon flashes when the battery is in final charging stage.
Indicates when the battery needs charging.
Flashes when low battery power level is detected.
(BACK)
(INT)
Indicates when there are more characters or numbers in front of those
Indicates when there are more characters or numbers after those being
Press the MENU/OK key to access the main menu.
Press the MENU/OK key to confirm the current selection.
Indicates new TAM message / new call in TAM message list / call list.
Press the C/MUTE key to start an intercom call.
Press the C/MUTE key to go back to the previous menu level or cancel
Press the C/MUTE key to clear a character, stop the alarm, or mute/unmute
being
displayed.
displayed.
the current action.
the microphone during a call.
3.4 Menu Structure
In idle mode, press <MENU/OK> to access the Call List menu. Refer to the
following for the menu structure.
<UP/DOWN>
Main
Menu
CALL LIST
PHONEBOOK
BS
SETTINGS
HS
SETTIN
GS
REGISTRATION
DEFAULT
ANS. MACHINE
Sub
menu
Review Call
List Under
a selected
Call List
entry:
ADD TO PB
DELETE
DELETE ALL
DETAILS
Review
phonebook
listUnder a
phonebook
entry:
ADD
VIEW
EDIT
DELETE
DELETE ALL
PB STATUS
BS RINGER
RING VOLUME
DELETE HS
DIAL MODE
FLASH TIME
CHANGE PIN
ALARM
RING SETUP
TONE SETUP
LANGUAGE
RENAME HS
HS DISPLAY
AUTO ANSWER
DATE & TIME
PIN? - - - -
MSG PLAYBACK
DELETE ALL
MEMO
TAM ON/OFF
TAM SETTINGS
ANSWER MOD
E
TAM LANGUA
GE
OGM SETTING
S
ANSWER DEL
AY
RECORD TIME
REMOTE ACC
COMPRESSION
SCREENING
CHANGE
PIN
PIN? - - - -
Key Press
<MENU>
<UP/
DOWN>
<UP/
DOWN>
<UP/
DOWN>
<UP/
DOWN>
<UP/
DOWN>
<UP/
DOWN>
3.5 Text and Digit Entry Table
The following table shows you where each letter and punctuation character can
be found, by using repeated presses of the alphanumeric keypad. This will be
helpful when storing a name in the
phonebook and renaming your handset.
In editing mode, a cursor is displayed to indicate the current text entry position.
It is positioned at the right of the last character entered.
Writing Tips:
1. Once a character is selected, the cursor will move to the next position after a
short pause.
2. You can move the cursor within the text with the <UP/DOWN> keys to
amend the text entry.
3. Press <C> to delete the last character.
4. Press and hold <C> to delete the entire text string.
3.5.1 Latin Character Set
Key
Press
1st 2
nd
3rd 4th 5th 6th 7th 8th 9th 10th
1 space - 1 1
2 A B C 2 2
3
D E F 3 3
4 G H I 4 4
5 J K L 5 5
6 M N O 6 6
7 P Q R S 7 7
8 T U V 8 8
9 W X Y Z 9 9
0 0 0, or P (Pause) if press and hold
*
*
? / \
( ) *
# #
,
-
.
#
Alphanumeric Editing
(For phonebook name editing and renaming handset )
Number Editing (For phone
number editing,date/time editing)
3.5.
Key
Press
1st 2
nd
3rd 4th 5th 6th 7th 8th 9th 10th
1 SP - 1 1
2 A B C 2 2
3
D E F 3 3
4 G H I 4 4
5 J K L 5 5
6 M N O 6 6
7 P Q R S 7 7
8 T U V 8 8
9 W X Y Z 9 9
0 0 0, P (Pause)
*
*
# #
Alphanumeric Editing
(For phonebook name editing and renaming handset)
Number Editing (For phone
editing, date/time editing)
Ł
Key
Press
1st 2
nd
3rd 4th 5th 6th 7th 8th 9th 10th
1 SP - 1 1
2
3
D E F 3 3
4 G H I 4 4
5 J K L 5 5
6 M N O 6 6
7 P Q R S 7 7
8 T U V 8 8
9 W X Y Z 9 9
0 0 0, P (Pause)
*
*
# #
Alphanumeric Editing
(For phonebook name editing and renaming handset)
Number Editing (For phone
editing, date/time editing)
Ø
2
Polish Character Set
3.5.3
Norwegian Character Set
Key
Key
2 A
Æ B C 2
Key
Press
1st 2
nd
3rd 4th 5th 6th 7th 8th 9th 10th
1 SP - 1 1
2 A B 2 2
3
E 3 3
4 H I 4 4
5 K 5 5
6 6 6
7 7 7
8 8 8
9 9 9
0 0 0, P (Pause)
*
*
# #
Alphanumeric Editing
(For phonebook name editing and renaming handset)
Number Editing (For phone
editing, date/time editing)
Γ
Δ Ζ
Θ
Λ Μ
Ν Ξ Ο
Π Ρ Σ
Τ Υ Φ
Χ Ψ
3.5.4
Greek Character Set
4 USING YOUR PHONE
4.1 Make a Call
4.1.1 Preparatory Dialing
Enter the phone number and press <TALK ON> / <SPEAKER PHONE> to
connect to the line and dial the number. When entering the number, if you
make a mistake, press <C> to delete digits.
4.1.2 Direct Dialing
Press <TALK ON> / <SPEAKER PHONE> to connect to the line and then
4.1.3 Call from the phonebook
Press <PHONEBOOK> to access the phonebook and press <UP/DOWN> to
Press <TALK ON> / <SPEAKER PHONE> to dial out the selected phonebook entry.
(Note: if you enter a wrong digit you cannot correct it with the <C> key.)
Note: You can also access the phonebook by pressing <MENU/OK>, <DOWN>,
<MENU/OK>.
select the desired phonebook entry.
4.1.4 Call from the Call List (only available with Caller Display)
Press <UP> to access the Call List and press <UP/DOWN> to select the desired
Press <TALK ON>/ <SPEAKER PHONE> to dial out the selected Call List entry.
Note: You can also access the Call List by pressing <MENU/OK> twice.
4.1.5 Call from the redial list
Press <DOWN> to access the redial list and press <UP/DOWN> to select the
Note: The alphanumeric keys provide a short-cut to find entries beginning with
the corresponding letters.
Call List entry.
desired redial number.
Press <TALK ON> / <SPEAKER PHONE> to dial out the selected redial number.
Note: You can also access the Redial List by pressing the <REDIAL> key.
enter the phone number.
4.1.6 Call timer
Your handset automatically times the duration of every call.
The call timer is displayed 15 seconds after dialling, and remains on the screen
for 5 seconds after the end of the call.It is shown in hours, minutes and seconds
4.2 Answer a Call
If the handset is not on the charging cradle:
When the phone rings, press <TALK ON> / <SPEAKER PHONE> to answer a call.
Note: If AUTO ANSWER is set to ON, then lifting the handset off the base or
charger will answer the call automatically, and no buttons need to be
format (HH:MM:SS).
pressed.
4.3 End a Call
During a call press <TALK OFF> to end the call.
OR
Put the handset on the base station or charger to end the call.
4.4 Adjust Volume
There are 5 levels (VOLUME 1 to VOLUME 5) to choose the earpiece or
During a call:
Press <UP/DOWN> to select volume 1-5. The current setting is shown.
When you end the call, the setting will remain at the last selected level.
4.5 Mute a Call
You can talk to someone nearby without letting the caller hear you during a call.
During a call:
Press <C> to mute the microphone and “MUTED” will display on the LCD.
Your caller cannot hear you. Press <C> again to unmute the microphone.
4.6 Set the Silent Mode
In idle, press and hold <HASH/#> to turn off the handset ringer. The “RINGER
OFF”
speakerphone volume.
icon is displayed on the LCD.
Note: The display will still flash the Call icon and show CALL or the Caller Display
number, when there is an incoming call, even if the ringer is turned off.
To turn the ringer back on, press and hold <HASH/#> again.
4.7 Turn on the Keypad Lock
In idle, press and hold <STAR/*> to turn on the keypad lock. The “KEYPAD
4.8 Redial the last number
You can redial any of the 5 last numbers called. If you have stored a name in
the phonebook to go with the number, the name will be displayed instead.
4.8.1 Redial a Number from the Redial List
1. In idle mode, press <DOWN> to access the redial list.
Note: If the redial list entry shows a name, press <Hash/#> to view the number
2. Press <UP/DOWN> to browse the redial list.
3. Press <TALK ON> / <SPEAKER PHONE> to dial to the selected redial number.
Note: If there are no numbers in the redial list, the display shows
EMPTY
.
4.8.2 Store a Redial Number into the Phonebook
1. Follow Steps 1 and 2 in section 4.8.1
.
2. Press <MENU> and <UP/DOWN> to select ADD TO PB.
3. Press <OK> and then enter the name you want to use in the phonebook.
4. Press <OK> and then modify the number, if necessary.
5. Press <OK> to show <MELODY 1>.
6. Press <UP/DOWN> to browse the ringtone list. The respective ringtone will
be played when browsing the ringtone list. (Note: the selected melody will
7. Press <OK> to confirm, and the entry will be stored.
Note: You can still use <TALK ON> / <SPEAKER PHONE>to answer a call when
To turn the keypad lock off, press and hold <STAR/*> again.
only be played if you subscribe to Caller Display and the incoming number
icon is displayed on the LCD.
The most recent last number will display at the top of the redial list.
of this entry.
matches the
stored number.)
4.8.3 Delete a Redial Number
1. Follow Steps 1 and 2 in section 4.8.1.
2. Press <MENU> and <UP/DOWN> to select DELETE.
3. Press
<OK> to confirm, and the entry will be deleted.
4.8.4
Delete the Entire Redial List
1. Follow Steps 1 and 2 in section 4.8.1.
2. Press <MENU> and <UP/DOWN> to select DELETE ALL
3. Press <OK> to display <CONFIRM?>.
4. Press <OK> to confirm. All entries will be deleted and the display will show
<EMPTY>.
LOCK”
the handset is ringing.
4.9 Find the Handset
You can locate the handset by pressing <PAGE> on the base station. All the
handsets registered to the base will produce the paging tone and show
<TALK OFF> /<C> on any handset or <PAGE> on the base again.
Note: If there is an incoming call during paging, the phone will ring with the
4.10 Make an Internal Call (For Multi-handset Versions Only)
This feature is only applicable when there are at least two registered handsets
.
It allows you to make internal calls, transfer external calls from one handset to
incoming call instead of paging.
"PAGING" on the display. You can stop the paging by pressing <TALKON>/
another handset and make conference calls. If the called handset is not in
answered with 60 seconds, the called handset will stop ringing and the calling
Note: If only one handset is registered to the base station, when <C/MUTE/INT>
is pressed, it will display NOT POSSIBLE
4.10.1 Intercom Another Handset
1. In idle mode, press <C/MUTE/INT>
and all the other registered handset
2. Enter the number of the handset that you want to call, or enter "9" to call all
3. The called handset rings and <TALK ON> / <SPEAKER PHONE> must be
Note: If only two handsets are registered to the base station, pressing
<C/MUTE/INT> will call the other handset immediately.
numbers will display, along with a "9".
to establish the intercom call.
4.10.3 Transfer an External Call to another handset
During an external call:
1. Press <MENU> and <UP/DOWN> to select INTERCOM
.
2. Press <OK> to show all the other registered handset numbers, plus "9".
3. The external call is put on hold automatically and the called handset rings
.
4. Press <TALK ON> / <SPEAKER PHONE> on the called handset to establish
Enter the number for the handset you
want to transfer the call to.
handset will return to
standby mode.
handsets.
5. Press <TALK OFF> on the calling handset or put the calling handset on the
charging cradle to end the current call with the external party.
6. The external call is transferred to the called handset.
4.10.2 Call All Handsets
1. In idle mode, press <C/MUTE/INT> and the registered handsets will display.
2. Press <KEY 9> to ring to all registered handsets
pressed on that handset
an internal call. the
4.10.4 Make a 3
-
way Conference Call
The conference call feature allows one external call to be shared with two
handsets (in intercom).
The three parties can share the conversation and no additional network
subscription is required.
During an external call:
1.
Follow Steps 1 to 4 in section 4.10.3.
2. Press and hold <STAR> on the calling handset to establish the conference call
Either handset can exit the conference by pressing <TALK OFF>, leaving the
other handset still connected to the
external call.
5 PRIVATE PHONEBOOK
Each handset can store up to 20 private phonebook entries with names and
numbers. Each phonebook entry can have a maximum of 20 digits for the
phone number and 12 characters for the name. You can also select different
ringtones for your phonebook entries. (Note: the different ringtones only play if
5.1 Add a New Phonebook Entry
In idle:
1. Press <PHONEBOOK> to access the phonebook.
OR
Press <MENU> and <UP/DOWN> to select PHONEBOOK and then press
<OK> to access the phonebook.
2. Press <MENU> to show ADD.
3. Press <OK> and then enter the name.
4. Press <OK> and then enter the number.
5. Press <OK> and <UP/DOWN> to select the desired ringtone for your
6. Press <OK> to store the phonebook entry.
you subscribe to Caller Display and
the incoming number matches the stored
number.) Phonebook entries are stored alphabetically by name.
phonebook entry.
5.2 Search a Phonebook Entry
In idle:
1. Press <PHONEBOOK> to access the phonebook.
2. Enter the first letter of the name using the alphanumeric keys, and then
<UP/DOWN> to scroll to the entry you
want.
16
Remote operation
Using a tone-dialling phone, dial your home number
You can also use the codes on the other side of this card
While your outgoing message is playing, press
Key in your remote security code
The default code is 0000. For details of how to set a new code,
see the User Guide 8.5.9.1 of page 31.
1
2
3
4
Note: Press <*> key after OGM playback cannot access your answering machine
remotely. If the 4-digit Remote Access PIN is entered incorrectly three times
consecutively, the line will be released automatically.
Note: If your answering machine is switched off, the phone will enter into
the remote access mode after 10 rings.
You can then enter the 4-digit remote access PIN
(Default Remote Access PIN is 0000) to activate the remote access feature.
Icarus 2020 system
1 2 3 4
10876
5
9
11
12
13
14
15
In a home with broadband, every telephone must have a micro-filter connected,
not just the one at the telephone point that your modem is connected to.
If you need more broadband micro-filters, contact your broadband supplier.
3 GETTING TO KNOW YOUR PHONE
3.1 Handset Overview
The maximum range between the base station and the handset is approximately
300 meters. Depending on the surrounding conditions as well as spatial and
struct ural factors, the range may be reduced.
2 INSTALLING YOUR PHONE
2.1 Connecting the base station
1) Plug the power supply
& line cord into
2) Plug the power adapter into a 230Vac,
3) Always use the cables provided in the box
Warning: Use only the provided adaptor, using
other power supplies may cause a hazard.
Warning: The power adaptor should be installed
and the line cord into your telephone line socket.
the base station.
50Hz mains socket,
The range indoors is normally less than outdoors, typically being up to 50 meters.
near the equipment and should be easily accessible.
Triple
• 3 Handsets
• 1 Base station
• 1 Mains power adapter
• 1 Telephone line cord
6 rechargeable batteries
• 1 User manual
• 2 Charger pods with
connected mains
power adapters
• 4 Handsets
• 1 Base station
• 1 Mains power adapter
• 1 Telephone line cord
• 1 User manual
• 3 Charger pods with
connected
mains power adapters
Quad
8
2.2 Installing and charging the batteries
1) Place the 2 batteries as indicated, ensuring their
2) Slide the battery compartment cover back.
3) Put the handset on the base and charge for
15 hours first time. A beep indicates that the handse
polarity is correct.
is properly placed on the base or cha
rger.
If you have a
Broadband line
If you connect your telephone to a line with
insert a micro-filter between the telephone
and the telephone line, otherwise you may get
interference between the telephone and the broadband,
which could cause problems.
a broadband connection, you will need to
Use only NiMH rechargeable batteries.
rechargeable batteries
WITH TELEPHONE ANSWERING MACHINE(TAM)CONTROL
RECALL(also called FLASH)
In idle / predialing mode:
Press to insert a recall
During a call:Press to dial
a recall
TALK ON
In idle / predialing mode:
Press to make a call
In Redial list / Call List /
Phonebookentry:
Press to make a call to the
selected entry in the list
During ringing:
Press to answer a call
LEFT SOFT KEY(MENU/OK)
In idle mode:Press
to access the main menu
In sub-menu mode:
Press to confirm the selection
During a call: Press to access
Intercom/Phonebook/ Redial
List/ Call List
TALK OFF
During a call: Press to end a call and go
back to idle screen
In menu / editing mode: Press to go back
to previous menu
In idle mode:
Press and hold to power off the handset
In idle mode (when the handset is powered
off): Press and hold to power
DOWN
In idle mode:Press to access the redial list
In menu mode:
Press to scroll down the menu items
In Phonebook list / Redial list / Call List:
Press to scroll down the list
During a call:
Press to decrease the earpiece volume
During ringing:
Press to decrease the ringer volume
UP
In idle mode:
Press to access the call list
In menu mode:
Press to scroll up the menu items
In Phonebook list / Redial list /
Call List:
Press to scroll up the list
During a call:
Press to increase the
earpiece volume
During ringing:
Press to increase the ringer volume
RIGHT SOFT KEY(CLEAR/BACK/MUTE/INTERCOM)
n main menu mode: Press to go back to idle screen
In sub-menu mode: Press to go back to previous level
In sub-menu mode: Press and hold to go back to idle screen
In editing / predialing mode: Press to clear a character / digi
t
In editing / predialing mode:
Press and hold to delete all the characters / digits
During a call: Press to mute/ unmute the microphone
In idle mode:Press to intercom another handset
SPEAKERPHONE
During a call:
Press to turn on / off the speakerphone.
Call List / Phonebook entry :
Press to make a call with speakerphone
During ringing:
Press to answer a call with speakerphone
During answering machine message playback /
call screening:
Press to play message via speaker
5
7.4.
7.4.
1
2
SET THE BASE RINGER MELODY .....................................................
SET THE RINGER VOLUME ....................................................................................
23
3
4
5
6
9
2
2
2
3
3
3
4
4
5
8
1
8
30
3
4
6.
7.
8.
9.
12.
IN USE LED
Steadily ON: During a call
Flashing: During ringing or new TAM message is received.
VOLUME
1
2
4
5
6
7
8
9
10
11
3
12
...................... 22
ca
Icarus 2020 system

Vraag over de Binatone Icarus 2020?

Wanneer u een vraag heeft over de "Binatone Icarus 2020" kunt u die hier stellen. Zorg voor een duidelijke omschrijving van uw probleem zodat andere gebruikers en/of de redactie u van een passend antwoord kunnen voorzien.

Koop gerelateerde producten:

Product specificaties

Prestatie
Soort DECT-telefoon
Antwoordapparaat yes
Opnametijd 15 min
Design
Montagewijze Bureau
Kleur van het product Zwart
Beheerfuncties
Klok met kalender yes
Telefoonfuncties
Luidspreker   yes
Aantal handsets mogelijk 2
Microfoon mute yes
Polyfone beltonen   no
Aantal melodieën 5
Oproep-management
Nummerherkenning yes
Opnieuw bellen yes
Aantal items in belgeschiedenis 10
Gesprekstijd timer yes
Geheugen
Capaciteit telefoonboek 20 entries
Beeldscherm
Ingebouwd display yes
Beeldscherm   LCD
Backlight-kleur Groen
Poorten & interfaces
Draadloze verbindingen no
Aansluiting voor netstroomadapter yes
Overige specificaties
Mac-compatibiliteit   no
Energie
Gesprekstijd 10
Standby tijd 100
Energie-opslagtechnologie accu/batterij   Nikkel-Metaalhydride (NiMH)
Ondersteund aantal accu's/batterijen 2
Certificaten
Energy Star-certificaat -

Gerelateerde producten: