Motorola C1001L handleiding

Motorola C1001L

Bekijk hier de Motorola C1001L handleiding. Het bekijken en downloaden van deze Dect/voip-telefoon handleiding is geheel gratis.

Merk
Motorola
Model
C1001L
Product
Dect/voip-telefoon
EAN
5055374792063, 5055374792216, 5055374792506, 5055374792513, 5055374793305, 5055374793312, 5055374793329, 5055374794029, 5055374794036, 5055374794203, 5055374795248, 5055374795347
Taal
Engels
Bestandstype
PDF
Website
http://www.motorola.com/
Switch on the mains power.
Installing and charging the handset
1. Remove the battery cover from the back of the handset and insert the
rechargeable Ni-MH battery cells supplied. Please note the ’+’ and
’-’ markings inside the battery compartment and insert in the correct
direction.
2. Slide the battery cover back into place.
3. If you are charging the batteries for the rst time, place the handset
on the base to charge for at least 24 hours continuously.
4. When the handset is fully charged,
icon will appear steady on
the display. Plug the other end of the telephone line cord (make sure
that one end is already plugged into the base) into the telephone
wall socket.
Connecting the handset and charger
(for multi-pack only)
If you have purchased a multiple pack, you will need to carry out this
process for all the handsets and chargers.
1. Plug the power adaptor into the socket marked
on the underside
of the charger and plug the other end into the mains power wall
socket.
2. Remove the battery cover from the back of the handset and insert
the 2 x AAA NiMH rechargeable batteries supplied. Please note the
’+’ and ’-’ markings inside the battery compartment and insert in the
correct direction.
3. Slide the battery cover back into place.
4. If you are charging the batteries for the rst time, place the handset
on the charger to charge for at least 24 hours continuously.
5. When the handset is fully charged,
icon will appear steady on the
display. The display will show
HANDSET
and handset number (e.g. 2) to
indicate that it is registered to the base.
You can set different ringer melodies for your internal and external calls.
Choose from 5 different ringer melodies.
You will hear a sample ring as you scroll to each ring melody.
1. Press
, scroll to
HANDSET
and press .
2. Press
or to select
INT MELODY
or
EXT MELODY
and press .
3. Press
or to select the ringer melody (1 - 5).
4. Press
to conrm or to return to the previous menu.
NOTE
If you subscribe to your network providers caller ID service, calls from the
numbers that you have stored in the phonebook will ring using the ringer
melody you have set when you store the entry.
5.3 Auto answer
Your phone is set to answer calls by lifting the handset off the base or
charger. You can switch this feature off so that calls can only be answered
by pressing .
1. Press
, scroll to
HANDSET
and press .
2. Scroll
to
AUTO ANSWER
and press .
3. Press
or to select
ON
or
OFF
and press to conrm.
5.4 Handset name
If you are using more than one handset with your C1L base, you can set a
personalized name for each handset to easily distinguish between them.
A name can be up to 10 characters long.
1. Press
, scroll to
HANDSET
and press .
2. Scroll
to
NAME
and press .
3. Enter the new handset name and press
to conrm.
Delete the current name by pressing
.
NOTE
The handset name will only be displayed for approximately 20 seconds
when no button is pressed. If you make a mistake, press
to delete
the last character or digit.
6. Press
to delete the number if required, then enter the new
number
and press
.
7. Scroll
or to select a new ringer melody and press . The
display
shows
ADD ENTRY
.
8. Enter the next name and number entry you wish to store in your
phonebook or press
twice to return to standby.
4.4 Delete an entry
1. Press . The display shows
PHONEBOOK
.
2. Press
. The display shows
ADD ENTRY
.
3. Scroll
to
DELETE ENTRY
and press .
4. Scroll
or to the entry you want to delete, or search
alphabetically
and press
. The display shows
CONFIRM ?
.
5. Press
to conrm or to cancel.
5. Handset settings
5.1 Handset ringer volume
You can adjust the ringer volume and set different volume levels for your
internal and external calls. Choose from 5 volume levels or Off.
1. Press
, scroll to
HANDSET
and press .
2. Press
or to select
INT RING VOL
or
EXT RING VOL
and press .
3. Press
or to select the volume (1 -5 or OFF) .
4. Press
to conrm or to return to the previous menu.
NOTE
When the phone is ringing, you can adjust the ringer volume by pressing
or .
5.2 Handset ringer melody
Press three times to enter O.
Press
once to enter M.
WRITING TIPS
Press
to delete the last character or digit.
Press
or to move between characters.
Press
to insert a space.
Use
twice to insert a dash.
4.2 View or dial an entry
1. Press .
icon is displayed.
2. Scroll
or to the entry you want.
OR
Enter the rst letter of the name to search alphabetically.
The rst name that starts with this letter or the nearest letter in the
alphabet will be displayed. Scroll or to the entry you want.
3. Press
to dial or to return to standby.
NOTE
When the name is displayed, you can switch between the name and
number by pressing
.
4.3 Edit a name and number
1. Press . The display shows
PHONEBOOK
.
2. Press
. The display shows
ADD ENTRY
.
3. Scroll
to
MODIFY ENTRY
and press .
4. Scroll
or to the entry you want to edit, or search alphabetically
and press . The existing name is displayed.
5. Press
to delete the name if required, then enter the new name
and press . The existing number is displayed.
1. Press
on the base. All handsets registered to the base will ring.
2. To stop the ringing, press
on the base again or press any button
on the handset.
4. Phonebook
You can store up to 50 names and numbers in the phonebook. Names
can be up to 12 characters long and numbers up to 24 digits. You can also
select different ringer melodies for the phonebook entries.
4.1 Store a name and number
If the C1L is connected to a switchboard, you may need to enter a pause in
a stored number. This gives the switchboard time to nd an outside line.
A pause is normally stored after the switchboard access code (e.g. 9).
When storing a number, press and hold until the display shows P.
You can then continue storing the phone number.
If you have subscribed to Caller ID Service and wish to display the name
of your caller instead of the number, save the full telephone number
including the area code to your phonebook.
You can store multiple entries with the same number. However, to prevent
unnecessary duplicated entries, you can only store the same name once.
1. Press
. The display shows
PHONEBOOK
.
2. Press
. The display shows
ADD ENTRY
.
3. Press
. The display shows
NAME ?
.
4. Enter the name and press
. The display shows
NUMBER ?
.
5. Enter the number and press
. The display shows
MELODY 1
.
6. Press
or to select the ringer melody you want and press .
The display shows
ADD ENTRY
.
7. Enter the next name and number entry that you wish to store in your
phonebook or press
twice to return to standby.
ENTERING NAMES
Use the keypad letters to enter names, e.g. to store TOM:
Press
once to enter T.
4. Press
again. The display shows
NAME ?
.
5. Enter the name and press
. The number is displayed.
6. Edit the number if necessary, then press
.
7. Press
or to select the ringer melody you want and press .
The number is stored.
3.6.3 Delete an entry
1. Press
to open the Redial list.
2. Scroll
or to the entry you want and press . The display
shows
DELETE ?
.
3. Press
to conrm or to cancel.
3.64 Delete the entire Redial list
1. Press
to open the Redial list.
2. Press and hold
. The display shows
DELETE ALL ?
.
3. Press
to conrm or to cancel.
3.7 Lock / unlock the keypad
You can lock the keypad so that it cannot be operated accidentally while
carrying it around.
NOTE
When the keypad is locked, you can still answer incoming calls and
operate the handset as normal during the call. When the call ends, the
keypad lock comes on again.
1. Press and hold
.
icon is displayed.
2. To unlock the keypad, press any key on your handset. The display
shows
PRESS *
.
3. Press
within 5 seconds.
3.8 Paging / Find handset
You can alert a handset user that they are wanted or locate a
missing handset.
Paging calls cannot be answered by a handset.
NOTE
If there is no answer from the other handset and you wish to return
to your external caller, press
.
Your external call resumes automatically after 30 seconds if there is
no answer.
3.5.4 3-way conference call
You can hold a 3-way conference call between 2 internal callers and 1
external caller.
During a call with an external caller:
1. Press
followed by the handset number (1-5) that you want to
establish a conference call.
2. When the other handset answers, press
to connect all three
callers to begin the conference call. icon is displayed.
3. If there is no answer from the other handset, press
to return to
your external caller.
4. Press
to end the call.
3.6 Redial
The last 10 entries dialled are stored in the redial list.
3.6.1 View or dial an entry
1. Press
to open the Redial list.
2. Scroll
or to the entry you want.
3. Press
to dial the displayed entry or press to return to
standby.
NOTE
If the caller’s number exactly matches an entry stored in the
phonebook, the name is displayed. Press
to see the caller’s number.
3.6.2 Copy a Redial list number to the phonebook
1. Press
to open the Redial list.
2. Scroll
or to the entry you want.
3. Press
. The display shows
ADD ?
.
2. Getting to know your phone
Overview of your handset
Flashes when battery is almost fully discharged.
1
This feature is dependent on your Network Service provider supporting
the service. A subscription fee may be payable.
2
For this feature to work, you must subscribe to Caller ID Service from
your network operator. A subscription fee may be payable.
Underside of the base
A
A Page
In standby mode, press to ring the handset(s).
Press and hold to enter registration mode when registering handsets.
Navigating the menus
Your C1L has an easy to use menu system.
Each menu has a list of options, which you can see on the menu map on
the following page.
When the handset is switched on and in standby:
1. Press
to open the main menu.
2. Then use
or buttons to scroll through the available options.
3. Press
to select an option. To return to the previous menu level,
press
. To exit the menu and return to standby, press .
NOTE
If no buttons are pressed for 20 seconds, the handset returns to standby
automatically.
Handset LCD Display
Flashes to indicate an incoming external call.
External call in progress.
Flashes to indicate an incoming internal call.
Internal call in progress.
3-way call in progress or transfer an external call to another C1L
handset registered to the base.
Eco mode is ON.
Flashes to indicate new voicemail messages received. Off when you
have no voicemail messages.
1
Indicates signal strength.
Flashes when handset is not registered to the base or if you go out of
range.
Menu is opened.
Phonebook is opened.
Flashes to indicate new calls list entries received.
2
Answered call (when viewing the Calls list).
2
Unanswered call (when viewing the Calls list).
2
Keypad is locked.
Displayed number is longer than 12 digits.
The approximate power levels of your battery are indicated as follows:
Battery is fully charged.
Battery is partially charged.
Battery is running low.
Menu map
PHONEBOOK HANDSET DATE -- TIME
ADD ENTRY BEEP DATE SET
MODIFY ENTRY INT RING VOL CLOCK SET
DELETE ENTRY EXT RING VOL ALARM SET
SETUP INT MELODY REGISTER
DEL HANDSET EXT MELODY SELECT BASE
PIN CODE AUTO ANSWER REG BASE
DIAL MODE NAME
RECALL LANGUAGE
DEFAULT KEYLOCK ?
ECO MODE
3. Using the phone
NOTE
Your handset will automatically time the duration of all external calls. The
call timer will display after the rst 15 seconds of your call. When the call
ends, the total duration of your talk time is shown for 5 seconds.
3.1 Switch the handset on / off
Press and hold to switch the handset on or off.
3.2 Calls
3.2.1 Make a call
1. Press
.
2. When you hear the dial tone, dial the number.
3.2.2 Preparatory dialling
1. Dial the number rst. If you make a mistake press
to delete the
last digit.
2. Press
to dial.
3.2.3 End a call
Press
, or place the handset back on the base or charger.
3.2.4 Receive a call
When you receive an external call, the phone rings and
icon ashes
on the display.
1. If the handset is off the base then press
to answer the call, or if
the handset is on the base simply lift the handset to answer the call.
NOTE
If you prefer to press
when you lift up the handset to answer a call,
you will need to switch Auto answer off.
3.3 Adjust the earpiece volume
During a call, press or to increase or decrease the volume. There are
5 levels to choose from.
3.4 Mute
You can mute your handset so that you can talk to someone nearby
without your caller hearing.
1. During a call, press
. The display shows
MUTE
and your caller
cannot hear you.
2. Press
again to resume your call.
3.5 Intercom
3.5.1 Make an internal call
If you have more than one handset registered to the base, you can make
internal calls between two handsets.
icon is displayed to indicate an internal call.
1. Press
followed by the number (1-5) of the handset you want
to call.
3.5.2 Receive an internal call
When you receive an internal call,
icon ashes and the handset
number that is calling you is displayed.
1. Press
to answer the call.
3.5.3 Transfer a call
You can transfer an external call to another handset registered to the base.
During an external call:
1. Press
followed by the handset number (1-5) that you want to
transfer to.
2. When the other handset answers, press
to complete the transfer.
1. Getting started
IMPORTANT
Do not place your C1L in the bathroom or other humid areas.
Location
You need to place your C1L base within 1.5 metres of the mains power
and telephone wall socket so that the cables will reach. The socket-outlet
should be installed near the equipment and should be easily accessible.
Make sure that it is at least 1 metre away from other electrical appliances
to avoid interference. Your C1L works by sending radio signals between
the handset and base. The strength of the signal depends on where you
place the base. Placing it as high as possible ensures the best signal.
HANDSET RANGE
The unit has a range of up to 300 metres outdoors when there is a clear
line of sight between the base and handset. Any obstruction between the
base and handset will reduce the range signicantly. With the base indoors
and the handset either indoors or outdoors, the range will normally be up
to 50 metres. Thick concrete and stone walls can severely affect the range.
SIGNAL STRENGTH
The
icon on your handset indicates that you are within range of the
base. When out of range of the base, the icon ashes. If you are on a
call, you will hear a warning beep.
The line will hang up if the handset moves out of range of the base. Move
closer to the base. The handset will automatically reconnect to the base.
Setting up
IMPORTANT
The base station must be plugged into the mains power at all times. Do
not connect the telephone line cord into the wall socket until the handset
is fully charged. Use only the power adaptor and telephone line cord
supplied with the product.
Connecting the base
1. Plug the telephone line cord into the socket marked on the
underside of the base.
2. Plug the power adaptor into the socket marked
on the underside
of the base and plug the other end into the mains power wall socket.
This user guide provides you with all the information you
need to get the most from your phone.
To set up your phone, follow the simple instructions in
‘Getting Started’, on the next few pages.
IMPORTANT
Only use the telephone line cord supplied.
Got everything?
• C1L base & cordless handset
• 2 x rechargeable Ni-MH battery cells
• Power adaptor for the base
• Telephone line cord
If you have purchased a C1L multiple pack you will also have the
following additional items:
• Cordless handset & charger
• 2 x rechargeable Ni-MH battery cells
• Power adaptor for the charger
ECOMOTO: a convergence of efforts by marketing, design, research,
engineering and supply chain management that leads to better
products for everyone. A holistic view that focuses on both social and
environmental responsibility. A passion and a shared point of view.
The right thing to do.
• Meets and / or exceeds EMEA environmental regulatory
requirements.
• Eco friendly packaging with a minimum 20% post consumer recycled
content.
• Phone housing is built with a minimum of 25% post consumer
recycled content plastic.
• Energy efcient charger that meets EU Code of Conduct
requirements.
• ECO mode function which reduces the transmitted power and energy
consumption.
Welcome...
to your new Motorola C1L Digital Cordless
Telephone!
• All handsets are fully cordless for locating anywhere within range.
• 50 Name and Number phonebook.
• Caller ID shows you who’s calling and see details of the last 40 callers
in a Calls list.1
• Redial up to 10 of the last numbers called.
• Register up to 5 handsets to a single base and register each handset
with up to 4 different bases.
• Make internal calls and transfer external calls between handsets.
• Choose from 5 different ringtones for internal and external calls as
well as numbers stored in the phonebook.
Please note that this equipment is not designed for making
emergency telephone calls when the power fails. Alternative
arrangements should be made for access to emergency services.
Need help?
If you have any problems setting up or using your C1L, please
contact Customer Services on XXXX XXXXXXX.
Alternatively, you may nd the answer in the ‘Help’ section at the
back of this guide.
1
You must subscribe to your network providers Caller ID or Call
Waiting service for these features to work. A subscription fee may
be payable.
Technical Information
How many telephones can I have?
All items of telephone equipment have a Ringer Equivalence Number
(REN), which is used to calculate the number of items which may be
connected to any one telephone line. Your C1L has a REN of 1. A total
REN of 4 is allowed. If the total REN of 4 is exceeded, the telephones may
not ring. With different telephone types, there is no guarantee of ringing,
even when the REN is less than 4.
Any additional handsets and chargers that you register have a REN of 0.
Connecting to a switchboard
This product is intended for use within Europe for connection to the
public telephone network.
Recall
You may need to use the recall function if you are connected to a switch.
Contact your PABX supplier for further information.
Manufactured, distributed or sold by Suncorp Technologies Ltd., ofcial
licensee for this product. MOTOROLA and the Stylized M Logo are
trademarks or registered trademarks of Motorola Trademark Holdings,
LLC. and are used under license. All other trademarks are the property
of their respective owners. © 2012 Motorola Mobility LLC. All rights
reserved.
Version 3 (EU)
IMPORTANT
Warning! Use only the approved rechargeable Ni-MH battery cells (2 x
AAA Ni-MH 300mA rechargeable batteries) supplied with your C1L.
BATTERY LOW WARNING
If
icon ashes on the display and you hear a warning beep every
minute during a call, you will need to recharge the handset before you
can use it again.
When charging,
icon will scroll on the display.
BATTERY PERFORMANCE
In ideal conditions, fully charged batteries should give up to 6.5 hours talk
time or up to 135 hours standby time on a single charge.
1
Note that new batteries do not reach their full capacity until they have
been put to normal use for several days.
To keep your batteries in the best condition, leave the handset off the
base for a few hours at a time.
Running the batteries right down at least once a week will help them last
as long as possible.
The charge capacity of rechargeable batteries will reduce with time as
they wear out, giving the handset less talk / standby time. Eventually they
will need to be replaced.
After charging your handset for the rst time, subsequent charging time is
about 6–8 hours a day. Batteries and handset may become warm during
charging. This is normal.
1
All talk and standby times are approximate and depend on features
selected and usage pattern.
Date and time
If you have subscribed to a Caller ID Service, the date and time is set
automatically for all handsets when you receive your rst call.
If you do not have a Caller ID service, you can set the date and time
manually, see section “7. Clock & Alarm”.
Your C1L is now ready for use.
EarpieceDisplay
Up
During a call, press to
increase earpiece volume.
When the phone is
ringing, press to increase
the handset ringer
volume.
Press to scroll through
the menu options, redial
list, calls list and
phonebook entries.
Menu / OK / Mute
Press to open the
Menu.
Press to select menu
options and to
conrm a displayed
option.
During a call, press to
turn mute on / off.
Talk
Press to make and
receive calls.
Keypad lock / * /
Switch from Pulse to
Tone
Press and hold to lock
the keypad.
To unlock, press any
key and follow the on
screen instructions.
Dial a *.
During a call, press
and hold to switch
from pulse dialling to
tone dialling.
Recall
Use with switchboard /
PABX services and some
network services.
Redial
In standby mode,
press to open the
redial list.
Phonebook / Delete / Back
In standby mode, press to
open the phonebook menu.
In editing mode, press to
delete characters and digits.
Go back to the previous
menu level.
Calls list / Down
In standby mode, press to
open the calls list.
During a call, press to
decrease earpiece volume.
When the phone is ringing,
press to decrease the
handset ringer volume.
Press to scroll through the
menu options, redial list,
calls list and phonebook
entries.
End Call / Exit / Switch
Handset on / off
Press to end a call.
When viewing the redial /
calls list / phonebook or
when in the menu, press to
exit and return to standby.
Press and hold for 3
seconds to switch the
handset on / off.
Pause / #
Press and hold to enter
a pause (P) when
pre-dialling or storing
numbers.
Dial a #.
Intercom
Used to make internal
calls and transfer calls
to other C1L handsets
registered to the base.
Microphone
Battery
status
Scrolls
when
charging
Time or Handset name
In standby mode, press and hold to switch handset
0
idle screen between handset name or time.
Eco mode
Circle around
appears when
Eco mode is ON
Warning:
Charge the handset for 24 hours before use.
Motorola C1L
For C1001L, C1002L, C1003L and C1004L
Digital Cordless Telephone

Vraag over de Motorola C1001L?

Wanneer u een vraag heeft over de "Motorola C1001L" kunt u die hier stellen. Zorg voor een duidelijke omschrijving van uw probleem zodat andere gebruikers en/of de redactie u van een passend antwoord kunnen voorzien.

Koop gerelateerde producten:

Product specificaties

Prestatie
Soort DECT-telefoon
Antwoordapparaat no
Intercom no
ECO mode yes
Compatibel met GAP: yes
Beeldscherm
Ingebouwd display yes
Beeldscherm   LCD
Beeldscherm, aantal kleuren Monochroom
Tekstregels 1
Design
Kleur van het product Red, White
Montagewijze Bureau
Ouderentelefoon no
Aantal knoppen 21
Poorten & interfaces
Draadloze verbindingen yes
Telefoonfuncties
Luidspreker   no
Aantal handsets mogelijk -
Microfoon mute yes
Capaciteit telefoonboek 50 entries
Energie
Type accu/batterij   AAA
Gesprekstijd 10
Standby tijd 200
Energie-opslagtechnologie accu/batterij   Nikkel-Metaalhydride (NiMH)
Ondersteund aantal accu's/batterijen 2
Oproep-management
Nummerherkenning yes
Gesprek in de wacht zetten yes
Capaciteit nummerherhalingslijst 10
Certificaten
Energy Star-certificaat -
Gewicht en omvang
Afmetingen handset (BxDxH) 105 x 85 x 150 mm
Beheerfuncties
Navigatietoets yes
Wekker yes
Volumeregeling Digitaal
Ondersteunde talen Multi
Inhoud van de verpakking
Inclusief basisstation yes
Gebruikershandleiding yes
Aantal handsets inclusief 1
Inclusief headset yes
Indicatie
Accucapaciteit yes
Batterij-oplaadindicatie yes

Gerelateerde producten: