Sony NP-FW50 handleiding

Sony NP-FW50

Bekijk hier de Sony NP-FW50 handleiding. Het bekijken en downloaden van deze Spiegelreflexcamera handleiding is geheel gratis.

Merk
Sony
Model
NP-FW50
Product
Spiegelreflexcamera
EAN
4905524677812
Taal
Engels
Bestandstype
PDF
Website
http://www.sony.com/
4-299-175-11(1)
©2011 Sony Corporation Printed in Thailand
NEX-7
Interchangeable Lens Digital Camera
Getting Started
Instruction Manual
E-mount
Checking the supplied items
The accessories supplied differ depending on the model. The number in
parentheses indicates the number of pieces.
Camera (1)
Battery charger BC-VW1 (1)
Power cord (mains lead) (1) (not supplied in the U.S.A. and Canada)
Rechargeable battery pack NP-FW50 (1)
USB cable (1)
Shoulder strap (1)
Eyepiece cup (1)
Body cap (1) (attached to the camera)
Accessory shoe cap (1) (attached to the camera)
Cleaning Cloth (1)
•CD-ROM (1)
Application Software for α camera
α Handbook
Instruction Manual (Getting Started: This manual) (1)
Instruction Manual (Operations) (1)
NEX-7K only
E18 – 55 mm zoom lens (1)/Front lens cap (1)/Rear lens cap (1) (The caps
are attached to the lens.)
Lens hood (1)
Attaching the shoulder strap is
recommended not to drop the camera.
Charging the battery pack
When using the camera for the first time, be sure to charge the NP-FW50
“InfoLITHIUM” battery pack (supplied).
The “InfoLITHIUM” battery pack can be charged even when it has not been
fully depleted. It can also be used when it has not been fully charged.
The charging time differs depending on the remaining capacity of the battery pack
or charging conditions. The above charging time is when charging a fully depleted
battery pack at a temperature of 25 °C (77 °F).
We recommend charging the battery pack in an ambient temperature of between
10 °C and 30 °C (50 °F and 86 °F) to efficiently charge the battery pack.
Connect the battery charger to the nearest wall outlet (wall socket).
Inserting the charged battery pack
x
Removing the battery pack
Inserting a memory card (sold separately)
x
Memory cards that you can use
You can use following types of memory cards with this camera. However,
proper operation cannot be guaranteed for all types of the memory cards.
You cannot use MultiMediaCard.
x
Removing the memory card
Open the cover, make sure that the access lamp is not lit, and push the memory
card once.
When the access lamp is lit, do not remove the memory card or the battery pack, or
turn off the power. The data may be corrupted.
Attaching/removing the lens
Set the power switch of the camera to OFF before you attach or remove the
lens.
When attaching a lens, do not press the lens release button.
Do not use force when attaching a lens.
The Mount Adaptor (sold separately) is required to use an A-mount lens (sold
separately). For details, refer to the operating manual supplied with the Mount
Adaptor.
x
Removing the lens
When changing the lens, if dust or debris gets inside the camera and adheres to the
surface of the image sensor (the part that acts as the film), it may appear as dark
spots on the image, depending on the shooting environment. The camera vibrates
slightly when it is turned off, due to the anti-dust function, to prevent dust from
adhering to the image sensor. However, attach or remove the lens quickly
somewhere away from dusty locations.
Setting up the date
When you turn on the camera for the first time, the screen to set date and time
appears.
Adjusting the viewfinder (diopter
adjustment)
Adjust the viewfinder so that you can see the screen displays clearly.
Attaching/removing the eyepiece cup
It is recommended that you attach the eyepiece cup when you intend to use the
viewfinder.
Remove the eyepiece cup when you attach an accessory (sold separately) to the
accessory shoe.
Installing the software
To utilize images recorded with the camera, the following software is
provided:
“Image Data Converter”
You can edit RAW images, etc.
“PMB” (Picture Motion Browser) (Windows only)
You can import images to the computer, edit them, such as displaying them
on a calender.
If “PMB” has already been installed on the computer, and the version number of
the previously installed “PMB” is lower than that of the “PMB” on the CD-ROM
(supplied), install “PMB” also from the CD-ROM (supplied).
x
Windows
The following computer environment is recommended when using the
supplied software and importing images via a USB connection.
* 64-bit editions and Starter (Edition) are not supported. Windows Image Mastering
API (IMAPI) Ver. 2.0 or later is required to use the function for creating discs.
** Starter (Edition) is not supported.
x
Macintosh
The following computer environment is recommended when using the
supplied software and importing images via a USB connection.
Precautions
The Cleaning Cloth
Remove large specks of dirt from the Cleaning Cloth before using it.
On the functions available with the camera
You may feel uncomfortable symptoms such as eyestrain, nausea, or a tired
feeling while watching 3D images recorded with the camera on 3D compatible
monitors. When you watch 3D images, we recommend that you take a break at
regular time intervals. Since the need for or frequency of break times varies
between individuals, please set your own standards. If you feel sick, stop
watching 3D images, and consult a doctor as needed. Also, refer to the
operating instructions of the connected device or the software used with the
camera. A child's vision is always vulnerable (especially for children under six
years of age). Before allowing them to watch 3D images, please consult with
an expert, such as a pediatric or ophthalmic doctor. Make sure your children
follow the precautions above.
On the LCD monitor and lens
The LCD monitor is manufactured using extremely high-precision
technology so over 99.99 % of the pixels are operational for effective use.
However, there may be some tiny black points and/or bright points (white,
red, blue or green in color) that constantly appear on the LCD monitor. These
points are normal in the manufacturing process and do not affect the images
in any way.
A magnet is attached to the back of the LCD monitor. Do not put objects that
are affected by magnetic fields, such as a floppy disk or a credit card,
between the LCD monitor and the camera body.
Images may trail across on the LCD monitor in a cold location. This is not a
malfunction. When turning on the camera in a cold location, the LCD
monitor may become temporarily dark.
Do not expose the camera to direct sunlight. If sunlight is focused on a
nearby object, it may cause a fire. When you must place the camera under
direct sunlight, attach the front lens cap.
On using the lenses and accessories
It is recommended that you use Sony lenses/accessories designed to suit the
characteristics of this camera. Using the products of other manufacturers may
cause the camera not to operate to its capability, or result in accidents and
malfunctions of the camera.
Do not use/store the camera in the following places
In an extremely hot, dry or humid place
In places such as in a car parked in the sun, the camera body may become
deformed and this may cause a malfunction.
Storing under direct sunlight or near a heater
The camera body may become discolored or deformed, and this may cause a
malfunction.
In a location subject to rocking vibration
Near strong magnetic place
1
Insert the battery pack onto the
battery charger, and charge it.
The CHARGE lamp turns off when
charging is finished.
For the U.S.A and Canada
CHARGE lamp
For countries/regions other
than the U.S.A. and Canada
Power cord (mains lead)
Notes
1
Open the cover, and insert the
battery pack.
Insert the battery pack while
pressing the lock lever with the tip
of the battery.
Lock lever
2
Close the cover.
Turn off the camera, make sure that the
access lamp is not lit, slide the lock lever
in the direction of the arrow, and pull out
the battery pack.
1
Insert a memory card with the
direction as illustrated here.
Insert the memory card until it
clicks as illustrated.
Check on the direction of the
notched corner.
Estimated charging
time
250 minutes
CHARGE lamp
Access lampLock lever
Usable memory card Still
image
Movie Term in this
manual
“Memory Stick PRO Duo”
media
(Mark2) “Memory Stick
PRO Duo” media
“Memory Stick PRO-HG
Duo” media
SD memory card (Class 4 or more) SD card
SDHC memory card (Class 4 or more)
SDXC memory card (Class 4 or more)
1
Mount the lens by aligning the
white index marks on the lens
and the camera.
Hold the camera’s face downward
to prevent the dust from entering
into the camera.
White index marks
2
While pushing the lens lightly
toward the camera, turn the
lens clockwise until it clicks
into the locked position.
Notes
1
Press the lens release button
all the way in and turn the lens
counterclockwise until it
stops.
Lens release button
Notes
1
Set the power switch to ON to turn on the camera.
The screen to set date and time appears.
2
Press the center of the control
wheel to confirm [OK].
3
Select your area by pressing the right or left of the control
wheel and press the center.
4
Press the left or right of the control wheel to select each
item, and press the top or bottom, or turn it to select the
numeric value.
Midnight is indicated as 12:00 AM, and noon as 12:00 PM.
5
When you have set all items, press the center of the control
wheel.
1
Turn the diopter-adjustment
dial.
1
Align the top of the eyepiece
cup with the viewfinder, and
snap it onto the bottom of the
viewfinder.
To remove the eyepiece cup, push
on the sides and pull the eyepiece
cup off the viewfinder.
Note
Note
OS (pre-installed) Microsoft Windows XP* SP3/Windows Vista** SP2/
Windows 7 SP1
“PMB” CPU: Intel Pentium III 800 MHz or faster
(For playing/editing the HD movies: Intel Core Duo
1.66 GHz or faster, Intel Core 2 Duo 1.66 GHz or faster,
Intel Core 2 Duo 2.26 GHz or faster (HD FX/HD FH), Intel
Core 2 Duo 2.40 GHz or faster (HD PS))
Memory: 512 MB or more (For playing/editing the HD
movies: 1 GB or more)
Hard Disk: Disk space required for installation—
approximately 500 MB
Display: Screen resolution—1024 × 768 dots or more
“Image Data
Converter Ver.4”
CPU/Memory: Pentium 4 or faster/1 GB or more
Display: 1024 × 768 dots or more
1
Insert the CD-ROM (supplied) into the CD-ROM drive, and
install the software following the instructions on the screen.
OS (pre-installed) USB Connection: Mac OS X (v10.3 to v10.6)
“Image Data Converter Ver.4”: Mac OS X v10.5/
Mac OS X v10.6 (Snow Leopard)
“Image Data
Converter Ver.4”
CPU: Intel processors, such as Intel Core Solo/Core Duo/
Core 2 Duo
Memory: 1 GB or more is recommended.
Display: 1024 × 768 dots or more
1
Insert the CD-ROM (supplied) into the CD-ROM drive, and
double-click the CD-ROM icon.
2
Copy the [IDC_INST.pkg] file in the [MAC] folder to the
hard disk icon.
3
Double-click the [IDC_INST.pkg] file in the copy-to folder.
Follow the instructions on the screen to complete the installation.
Magnet

Vraag over de Sony NP-FW50?

Wanneer u een vraag heeft over de "Sony NP-FW50" kunt u die hier stellen. Zorg voor een duidelijke omschrijving van uw probleem zodat andere gebruikers en/of de redactie u van een passend antwoord kunnen voorzien.

Koop gerelateerde producten:

Product specificaties

Accu/Batterij
Energie-opslagtechnologie accu/batterij   Lithium-Ion (Li-Ion)
Capaciteit van de accu/batterij 1020 mAh
Accu/Batterij voltage - V
Bedoeld voor Digitale camera
Accu/Batterij capaciteit (Watt uur) 7.3 Wh
Compatibele producten Sony α NEX-3, α NEX-5, α NEX-7
Kleur van het product Zwart
Merkcompatibiliteit   Sony
Energie-opslagtechnologie accu/batterij   Lithium-Ion (Li-Ion)
Capaciteit van de accu/batterij 1020 mAh
Accu/Batterij voltage - V
Bedoeld voor Camera
Aantal inbegrepen batterijen 1
Accu/Batterij capaciteit (Watt uur) 7.3 Wh
Compatibele producten Sony α NEX-3, α NEX-5, α NEX-7
Kleur van het product Zwart
Merkcompatibiliteit   Sony
Inhoud van de verpakking
Aantal inbegrepen batterijen 1
Gewicht en omvang
Gewicht   42 g
Breedte 31.8 mm
Diepte 18.5 mm
Hoogte   45 mm
Gewicht   42 g
Breedte 31.8 mm
Diepte 18.5 mm
Hoogte   45 mm

Gerelateerde producten: