O WEAR AND ADJUST Y OUR HEADSET
Place the headset on your head.
Position the speaker(s) directly on your ear(s). Y ou can slide the headband in
or out of the side support for proper fit.
Position the microphone about one finger’ s width away from your face near the
center of your mouth.
The microphone boom is quite flexible, so you can bend
it toward your mouth as needed for optimum sound quality and a custom fit.
The headband is also very flexible and can be easily adjusted by gentl y flexing
outward to loosen or inward to tighten for a custom fit.
elephone Amplifier or CT Switch
Connect your headset to the amplifier or switch headset cord.
Be sure the other end of this cord is plugged into the headset port on the amplifier
or switch—just look for a headset icon.
If necessary , consult your amplifier or switch user guide to locate the port.
Make sure the headset is connected to a lower cord that is compatible with your phone system.* Plug the end of the lower cord into the headset
port on your telephone.
Some phones allow for connection to the handset port. Please consult your telephone user manual for more information.
For USB connection, connect your headset to a VXi X200 USB adapter cord, and plug the X200 cord into a USB port on your computer.
For soundcard connection, connect your headset to a VXi QD 1030 cord, and insert the cord’s plugs into the microphone and speaker ports on
o access our interactive phone and lower cord compatibility guide, visit us on-line at www .vxicorp.com > Resources > Phone Compatibility .
If you need additional technical assistance or product information, please call
VXi T echnical Support, toll-free at (800) 742-8588.
VXi UC ProSet
Simple to set up and use.
Gently flex headband
outward or inward to
loosen or tighten fit.
easily flexes for